CAMCOAT: CERMARED™, CERMABLUE™, CERMASSTEEL™

VISIT THE NEW CAMCOAT WEBSITE HERE OR VIEW THE NEW COATINGS PAGE HERE

THERMAL BARRIER COATINGS > CERMARED™, CERMABLUE™, CERMASSTEEL™

These coatings are coloured versions of the “Cermakrome” coating and have similar properties. The degree of shine can be varied by the amount of polishing time applied so interesting decorative patterns can be obtained. The “CermaSSteel” coating cures to a grey colour but takes on the appearance of stainless steel after time in a vibratory polisher.

Function	Decorative thermal barrier	After cure treatment	Light polish Time varies finish appearance
Material	CermaBlue™, CermaRed™, CermaSSteel™	Max. operating temperature	700ºc
Colour	Pastel blue, Pastel Red, Stainless steel	Pencil hardness	n/a
Substrates	Metals capable of withstanding 260ºc cure	Adhesion (Tape test ASTM D3330)	Good
Base	Water	Resistance to acids	Good
Flash point	None	Resistance to alkalines	Good
Boiling point	n/a	Resistance to solvents	Good
VOC's	0	Resistance to Corrosion	Good
Viscosity (cup test)	n/a	Flexibility	Excellent
Surface preparation	Sandblast	Resistance to impact	Good
Coating application by	Spray	UN classification	None hazardous
Theoretical coverage	12 sq m/litre	Container sizes	500 ml, 1 litre, 1 US Quart, 1 US Gallon
Cure conditions	260º C for 1 hour	Shelf life	12 months
Cured coating thickness	25 - 40 microns (0.001" - 0.0015")	Material safety data sheet	click here to view