CAMCOAT: DFL-1

VISIT THE NEW CAMCOAT WEBSITE HERE OR VIEW THE NEW COATINGS PAGE HERE

DFL-1 is a thermally cured dry film lubricant which makes use of a unique binding system to retain high temperature stability while reducing friction on any part subject to sliding or rotating friction. It is water based so safe and easy to apply. We recommend DFL-1 as the lubrication coating to use on plain bearings.

Function	Lubrication (plain bearings in particular)	After cure treatment	Light buff
Material	DFL-1	Max. operating temperature	1000ºc
Colour	Grey	Pencil hardness	n/a
Substrates	Any Metal - best on soft metals	Resistance to acids	Poor
Base	Water	Resistance to alkalines	Poor
Flash point	None	Resistance to solvents	Excellent
Boiling point	100ºc	Resistance to Corrosion	Poor
VOC's	Appreciable	Flexibility	Very good
Viscosity (cup test)	n/a	Resistance to impact	Very good
Surface preparation	Light rub with Scotchbrite on bearings	UN classification	Not classified for shipping
Coating application by	Spray	Container sizes	210ml, 500ml, 1 litre, 5 litre
Theoretical coverage	10 sq m/litre	Shelf life	12 months
Cure conditions	1 hour @ 150ºc	Material safety data sheet	click here to view
Cured coating thickness	10 to 25 microns