CAMCOAT: CERMALUBE

LUBRICANT COATINGS > CERMALUBE

CermaLube is a ceramic coating designed to be used on any rigid or semi-rigid surface experiencing rotating or oscillating friction. The non-hazardous water based formulation combines the durability of a ceramic resin with the lubricity of the ceramic lubricant. It is particularly good where high temperature, loading and speed levels are experienced and where other lubricants fail to perform. In use it acquires a glass-like finish.

Function	Lubrication	After cure treatment	Buff surface if tight fit
Material	Cermalube	Max. operating temperature	over 1000ºc
Colour	Grey	Pencil hardness	5 (HRC 45)
Substrates	Metal(not magnesium), plastic	Resistance to acids	Good
Base	Water	Resistance to alkalines	Good
Flash point	n/a	Resistance to solvents	Good
Boiling point	100ºc	Resistance to Corrosion	Excellent
VOC's	0	Flexibility	Excellent
Viscosity (cup test)	9	Resistance to impact	Excellent
Surface preparation	Sandblast or acid etch	UN classification	Not classified for shipping
Coating application by	Spray	Container sizes	1 litre, 1US gallon (3.8l), 5 litre
Theoretical coverage	10 sq m/litre	Shelf life	12 months
Cure conditions	1 hour @ 175ºc	Material safety data sheet	click here to view
Cured coating thickness	25 microns