CAMCOAT: TECHTREX™73000

VISIT THE NEW CAMCOAT WEBSITE HERE OR VIEW THE NEW COATINGS PAGE HERE

TECHTREX™ 73000 thermoplastic coating is formulated from Victrex® PEEK™ polymer in a thin film water dispersion. This allows the user to combine all the performance benefits associated with PEEK™ enhanced with the low coefficient of friction and excellent release properties of added PTFE. Meets FDA requirements for repeated use in contact with food.

Function	Release coating	After cure treatment	None
Material	TECHTREX™73000	Max. operating temperature	260ºc continuous
Colour	Unpigmented is amber. Black and blue	Pencil hardness	n/a
Substrates	Materials that can withstand the 400ºc cure	Adhesion (Tape test ASTMD3330)	Excellent
Base	Water	Resistance to acids	Excellent
Flash point	0	Resistance to alkalines	Excellent
Boiling point	n/a	Resistance to solvents	Excellent
VOC's	None	Resistance to Corrosion	Excellent
Viscosity (cup test)	n/a	Flexibility	Excellent
Surface preparation	Sandblast	Resistance to impact	Good
Coating application by	Spray	UN classification	Not classified
Theoretical coverage	10 sq.m/litre	Container sizes	500ml, 1 litre, 1US gallon (3.8l), 5 litre
Cure conditions	20 mins at 400ºc	Shelf life	12 months+
Cured coating thickness	25 - 40 microns (0.001" - 0.0015")	Material safety data sheet	click here to view