CAMCOAT: IC-105

VISIT THE NEW CAMCOAT WEBSITE HERE OR VIEW THE NEW COATINGS PAGE HERE

COMPOSITE COATINGS > IC-105

IC-105 can be sprayed or brushed on to composite materials to provide thermal protection from sources of heat. It air dries with full chemical stability at 150º C through exposure to the source of heat or by oven curing.

Function	Thermal insulation for composite materials	After cure treatment	None
Material	IC-105	Max. operating temperature	315ºc continuous
Colour	Dark grey	Pencil hardness	n/a
Substrates	Plastics, composites and metals	Adhesion (Tape test ASTMD3330)	Good
Base	Water based emulsion	Resistance to acids	Good
Flash point	0	Resistance to alkalines	Good
Boiling point	>100ºc	Resistance to solvents	Good
VOC's	<70 grams/litre	Resistance to Corrosion	Good
Viscosity (cup test)	n/a	Flexibility	Very good
Surface preparation	Degrease	Resistance to impact	Good
Coating application by	Spray or brush	UN classification	Not classified
Theoretical coverage	6-7 sq.m/litre	Container sizes	1 litre, 1US gallon (3.8l), 5 litre
Cure conditions	Airdry for 30 mins. 1 hour @ 150ºc	Shelf life	12 months
Cured coating thickness	100-125 microns (0.004"-0.005") layers	Material safety data sheet	click here to view