Base Ceramic Q-Coat

 

Q-Coat was developed specifically for use as a base ceramic coating on cast iron. It has excellent adhesion to the metal and provides a high level of thermal insulation. It is a water based coating so colours can be added and a clear top coat of CermaSeal™ applied to give a neutral coloured and durable finish.
 Function Ceramic base coat for cast iron
 Material
 Q-coat
 Colour Olive green/grey
 Substrates Any metal capable of withstanding 260ºc cure
 Base Water
 Flash Point None
 Boiling Point n/a
 VOC's 0
 Viscosity (Cup Test) 14 secs
 Surface Preparation Sandblast
 Coating Application By Spray, brush, dip
 Theoretical Coverage 10 sq m/litre
 Cure Conditions Oven cure 260ºc for 1 hour
 Cured Coating Thickness 25 – 50 microns (0.001” – 0.002”)
 After Cure Treatment Apply clear or coloured topcoat
 Max. Operating Temp. 1000ºc
 Pencil Hardness n/a
 Adhesion (Tape Test ASTM D3330) Good
 Resistance To Acids Poor
 Resistance To Alkalines Poor
 Resistance To Solvents Excellent
 Resistance To Corrosion Excellent
 Flexibility Good
 Resistance To Impact Fair
 UN Classification Not classified
 Container Sizes 500 ml, 1 litre, 1 US Gallon, 5 litres
 Shelf Life 12 months
 Material Safety Data Sheet Click Here To View