Cermalube

 

 

 

 

 

 

 

 

CermaLube is a ceramic coating designed to be used on any rigid or semi-rigid surface experiencing rotating or oscillating friction. The non-hazardous water based formulation combines the durability of a ceramic resin with the lubricity of the ceramic lubricant. It is particularly good where high temperature, loading and speed levels are experienced and where other lubricants fail to perform. In use it acquires a glass-like finish.

 Function Lubrication
 Material
 Cermalube
 Colour Grey
 Substrates Metal(not magnesium), plastic
 Base Water 
 Flash Point n/a
 Boiling Point 100ºc
 VOC's 0
 Viscosity (Cup Test) 9
 Surface Preparation Sandblast or acid etch
 Coating Application By Spray
 Theoretical Coverage 10 sq m/litre
 Cure Conditions 1 hour @ 175ºc
 Cured Coating Thickness 25 microns
 After Cure Treatment Buff surface if tight fit
 Max. Operating Temp. over 1000ºc
 Pencil Hardness 5 (HRC 45)
 Adhesion (Tape Test ASTM D3330) n/a
 Resistance To Acids Good
 Resistance To Alkalines Good
 Resistance To Solvents Good
 Resistance To Corrosion Excellent
 Flexibility Excellent
 Resistance To Impact Excellent
 UN Classification Not classified for shipping
 Container Sizes 1 litre, 1US gallon (3.8l), 5 litre
 Shelf Life 12 months
 Material Safety Data Sheet Click Here To View