DFL-1

 

 

 

 

 

 

 

 

DFL-1 is a thermally cured dry film lubricant which makes use of a unique binding system to retain high temperature stability while reducing friction on any part subject to sliding or rotating friction. It is water based so safe and easy to apply. We recommend DFL-1 as the lubrication coating to use on plain bearings.

 Function Lubrication (plain bearings in particular)
 Material
 DFL-1
 Colour Grey
 Substrates Any Metal - best on soft metals
 Base Water
 Flash Point None
 Boiling Point 100ºc
 VOC's Appreciable
 Viscosity (Cup Test) n/a
 Surface Preparation Light rub with Scotchbrite on bearings
 Coating Application By Spray
 Theoretical Coverage 10 sq m/litre
 Cure Conditions 1 hour @ 150ºc
 Cured Coating Thickness 10 to 25 microns
 After Cure Treatment Light buff
 Max. Operating Temp. 1000ºc
 Pencil Hardness n/a
 Adhesion (Tape Test ASTM D3330) n/a
 Resistance To Acids Poor
 Resistance To Alkalines Poor
 Resistance To Solvents Excellent
 Resistance To Corrosion Poor
 Flexibility Very good
 Resistance To Impact Very good
 UN Classification Not classified for shipping
 Container Sizes 210ml, 500ml, 1 litre, 5 litre
 Shelf Life 12 months
 Material Safety Data Sheet Click Here To View