IC-105

 

 

 

 

 

 

 

 

IC-105 can be sprayed or brushed on to composite materials to provide thermal protection from sources of heat. It air dries with full chemical stability at 150º C through exposure to the source of heat or by oven curing.

 FunctionThermal insulation for composite materials
 Material
 IC-105
 Colour Dark grey
 Substrates Plastics, composites and metals
 Base Water based emulsion
 Flash Point 0
 Boiling Point >100ºc
 VOC's <70 grams/litre
 Viscosity (Cup Test) n/a
 Surface Preparation Degrease
 Coating Application By Spray or brush
 Theoretical Coverage 6-7 sq.m/litre
 Cure Conditions Airdry for 30 mins.  1 hour @ 150ºc
 Cured Coating Thickness 100-125 microns (0.004"-0.005") layers
 After Cure Treatment None
 Max. Operating Temp. 315ºc continuous
 Pencil Hardness n/a
 Adhesion (Tape Test ASTM D3330) Good
 Resistance To Acids Good
 Resistance To Alkalines Good
 Resistance To Solvents Good
 Resistance To Corrosion Good 
 Flexibility Very good
 Resistance To Impact Good
 UN Classification Not classified
 Container Sizes 1 litre, 1US gallon (3.8l), 5 litre
 Shelf Life 12 months
 Material Safety Data Sheet Click Here To View