P-Coat and R-Coat

 

 

 

 

 

 

 

 

P-Coat and R-Coat have been formulated to provide excellent wear and abrasion resistance with a lower cure temperature of 150º C allowing use on a wider range of substrates. P-Coat has a lower viscosity and is therefore used on machined surfaces whilst R-Coat, being thicker, can be used on cast surfaces.

 Function Wear resistance coating
 Material
 P-COAT, R-COAT
 Colour P-COAT: White, R-COAT: Grey
 Substrates Materials that can withstand the 150ºc cure
 Base Solvent
 Flash Point 26ºc
 Boiling Point n/a
 VOC's 740 grams/litre
 Viscosity (Cup Test) n/a
 Surface Preparation Sandblast
 Coating Application By Spray, brush, dip, pour
 Theoretical Coverage P-COAT: 10 sq.m/litre R-COAT: 8 sq.m/litre
 Cure Conditions 1 hour at 150ºc
 Cured Coating Thickness 25 - 75 microns (0.001" - 0.003")
 After Cure Treatment None
 Max. Operating Temp. 500ºc continuous, 1000ºc intermittent
 Pencil Hardness 8+
 Adhesion (Tape Test ASTM D3330) Excellent
 Resistance To Acids Excellent
 Resistance To Alkalines Poor
 Resistance To Solvents Excellent
 Resistance To Corrosion Excellent
 Flexibility P-COAT: Very Good R-COAT: Good
 Resistance To Impact Good
 UN Classification Flammable liquid.  UN1263 Class 3
 Container Sizes 500ml, 1 litre, 1US gallon (3.8l), 5 litre
 Shelf Life 12 months
 Material Safety Data Sheet Click Here To View