Techtrex™73000

 

 

 

 

 

 

 

 

TECHTREX™ 73000 thermoplastic coating is formulated from Victrex® PEEK™ polymer in a thin film water dispersion. This allows the user to combine all the performance benefits associated with PEEK™ enhanced with the low coefficient of friction and excellent release properties of added PTFE. Meets FDA requirements for repeated use in contact with food.

 Function Release Coating
 Material
 TECHTREX™73000
 Colour Unpigmented is amber.  Black and blue
 Substrates Materials that can withstand the 400ºc cure
 Base Water
 Flash Point 0
 Boiling Point n/a
 VOC's None
 Viscosity (Cup Test) n/a
 Surface Preparation Sandblast
 Coating Application By Spray
 Theoretical Coverage 10 sq.m/litre
 Cure Conditions 20 mins at 400ºc
 Cured Coating Thickness 25 - 40 microns (0.001" - 0.0015")
 After Cure Treatment None
 Max. Operating Temp. 260ºc continuous
 Pencil Hardness n/a
 Adhesion (Tape Test ASTM D3330) Excellent
 Resistance To Acids Excellent
 Resistance To Alkalines Excellent
 Resistance To Solvents Excellent
 Resistance To Corrosion Excellent
 Flexibility Excellent
 Resistance To Impact Good
 UN Classification Not classified
 Container Sizes 500ml, 1 litre, 1US gallon (3.8l), 5 litre
 Shelf Life 12 months+
 Material Safety Data Sheet Click Here To View