TLMB

 

 

 

 

 

 

 

TLML (Tech Line Moly Lubricant) is a thermally cured dry film lubricant. The binders retain high pressure/low friction lubricating pigments which allow the coating to withstand loadings in excess of 350,000 psi. The cured coating is not affected by most chemicals and enhances surface cooling. TLML2 is a softer version of TLML and TLMB is a high load polymer version primarily designed to build up surface dimensions (piston coating)prior to the application of TLML or TLML2.

 Function Lubrication
 Material
 TLML, TLML2, TLMB
 Colour Grey to Grey/Brown
 Substrates Any Metal, plastic
 Base Solvent
 Flash Point 40ºc
 Boiling Point n/a
 VOC's 810 grams/litre
 Viscosity (Cup Test) 15
 Surface Preparation Sandblast or acid etch
 Coating Application By Spray
 Theoretical Coverage 12 sq m/litre
 Cure Conditions 1 hour @ 150ºc
 Cured Coating Thickness 10 to 30 microns
 After Cure Treatment Buff with Scotchbright/0000 Wool
 Max. Operating Temp. 1100ºc
 Pencil Hardness 8+ (HRC 35)
 Adhesion (Tape Test ASTM D3330) n/a
 Resistance To Acids Good
 Resistance To Alkalines Good
 Resistance To Solvents Good
 Resistance To Corrosion Good
 Flexibility Excellent
 Resistance To Impact Excellent
 UN Classification UN 1263 Class 3
 Container Sizes 1 litre, 1US gallon (3.8l), 5 litre
 Shelf Life 12 months
 Material Safety Data Sheet Click Here To View