 |
 |
 |
 |
 |
 |
Performance Ceramic
Coated Pistons
Imagine the stressed life of a racing piston. Rotating at up to 20,000
rpm, combustion temperatures of up to 1500 degrees C on the crown with
the risk of being "pinged" to death by detonation and all the
while it must deliver the power for minutes or hours. Quite a challenge
to survive at the limit yet the application of performance coatings
brings about improvements.
| A moly-disulphide dry-film lubricant coating reduces frictional losses and reduces the chances of galling and scuffing. |
A thermal dispersant coating inside the piston maximises the amount of heat rejection from the metal. |
A thin, highly polished ceramic coating on the crown insulates the piston. The reflective surface reduces carbon build-up and increases the rate of combustion. |
 |
 |
 |
|
After application of these
three coatings, engine power increases of 5% are achieved through
more ignition advance, a higher boost level or, on two strokes,
by leaning off the air/fuel ratio.  Be SMART - Be CAMCOATED |
||
Camcoat Performance
Coatings. 127 Hoyle St. Bewsey Industrial Estate. Warrington.
WA5 0LP. UK
Tel: 44-(0)1925-445688 Fax: 44-(0)1925-444988 Email: sales@camcoat.com
Tel: 44-(0)1925-445688 Fax: 44-(0)1925-444988 Email: sales@camcoat.com